Brennwertkessel
Einführung von Brennwertwandkessel
Der Brennwertwandkessel ist eine Wasserheizung mit hohem Wirkungsgrad. Es macht Gebrauch von der Abwärme der Abgase zur Vorwärmung der kaltes Wasser in einem Kessel. Es nimmt Gas oder Öl als Brennstoff. Der Grund, warum es Brennwertkessel heißt, ist, dass der bei der Verbrennung entstehende Wasserdampf zu flüssigem Wasser kondensiert und das System über einen Ablass verlässt.Arten von Brennwertkessel (Angabe)
1. H SerieModell | L1PB20-H18B | L1PB26-H24B | L1PB30-H28B | Unit |
Eingestufter Hitzeausgang | 20 | 26 | 30 | kW |
Eingestufter Hitzezufuhr Ausgang | 18 | 23.3 | 27 | kW |
Minimum Hitzeeingang | 7.4 | 9.6 | 11 | kW |
Minimum Hitzezufuhr Ausgang | 6.3 | 8.2 | 9.5 | kW |
Bereich der Hitzezufuhr Temp. | 30~80 | 30~80 | 30~80 | ℃ |
Bereich der Bodehitzezufuhr Temp. | 30~55 | 30~55 | 30~55 | ℃ |
Druck des Hitzezufuhr Systems | 0.05~0.3 | 0.05~0.3 | 0.05~0.3 | MPa |
Maximum Druck Hitzezufuhr Systems | 0.3 | 0.3 | 0.3 | MPa |
Ausdehnungsttank Kapazität | 6 | 6 | 6 | L |
Voreingestellter Druck des Ausdehnungstank | 0.1 | 0.1 | 0.1 | MPa |
Temp Bereich der Duschwasserzufuhr | 30~60 | 30~60 | 30~60 | ℃ |
Komfortabler Temp. Bereich des Wassers | 35~45 | 35~45 | 35~45 | ℃ |
Maximum Druck des Duschwassers | 0.6 | 0.6 | 0.6 | MPa |
Minimum Druck des Duschwassers | 0.02 | 0.02 | 0.02 | MPa |
ΔT=25℃ Wasserzufuhr | 10 | 13 | 15 | Kg/min |
ΔT=30℃ Wasserzufuhr | 8.3 | 10.8 | 12.5 | Kg/min |
Spannung/Frequenz | 220/50 | 220/50 | 220/50 | V/Hz |
Maximum Eingangsstrom | 110 | 110 | 120 | W |
Insulation Grad | Ⅰ | Ⅰ | Ⅰ | |
Wasserfest Grad | IPX4 | IPX4 | IPX4 | |
Verbingung der Wasserzufuhr /Rückwasser | G3/4 | G3/4 | G3/4 | Inch |
Gas Eingang | G3/4 | G3/4 | G3/4 | Inch |
Verbindung der Zirkulation des Heißen Wassers | G3/4 | G3/4 | G3/4 | Inch |
Coaxial Eingang/Ausgang | Φ60/Φ100 | Φ60/Φ100 | Φ60/Φ100 | mm |
Eingestufter Druck des Natürlichen Gases | 2000 | 2000 | 2000 | Pa |
Frontdüsendruck des Natürlichen Gases (Max/ Min) | 1200/150 | 1200/150 | 1200/150 | Pa |
Gasverbrauch des natürlichen Gases (Max/Min) | 2.06/0.75 | 2.67/0.96 | 3.08/1.11 | Nm3/h |
Eingestufter Druck von flüssigem Gas | 2800 | 2800 | 2800 | Pa |
Frontdüsendruck des flüssigen Gas (Max/ Min) | 2350/300 | 2350/300 | 2350/300 | Pa |
Gasverbrauch des flüssigen Gas (Max/Min) | 0.75/0.28 | 0.97/0.36 | 1.12/0.41 | Nm3/h |
Net Gewicht | 34.5 | 36.5 | 36.5 | kg |
Ansichtsdimension: L×B×H | 720×400×300 | 720×400×300 | 720×400×300 | mm |
Energieeffizienz Grad | Grad 2 |
Model | L1PB35-K32BR | Unit |
Rated Heat Output | 35 | kW |
Rated Heating supply Output | 31.5 | kW |
Minimum Heat Input | 13 | kW |
Minimum Heating Supply Output | 11.1 | kW |
Range ofHeating Supply Temp. | 30~80 | ℃ |
Range ofFloor Heating Supply Temp. | 30~55 | ℃ |
Pressure of Heating Supply System | 0.05~0.3 | MPa |
Maximum Pressure of Heating Supply System | 0.3 | MPa |
Expansion Tank Capacity | 6 | L |
Preset Pressure Of Expansion Tank | 0.1 | MPa |
Temp Range Of Shower Water Supply | 30~60 | ℃ |
Comfortable Temp.RangeOfWater Supply | 35~45 | ℃ |
Maximum Pressure of Shower Water | 0.6 | MPa |
Minimum Pressure of Shower Water | 0.02 | MPa |
Water Supply Capability | 20 | L |
Voltage/Frequency | 220/50 | V/Hz |
Maximum Input Power | 110 | W |
Insulation Grade | Ⅰ | |
Waterproof Grade | IPX4 | |
Connector of Heating Supply Outlet/Backwater | G3/4 | Inch |
Gas Inlet | G3/4 | Inch |
Connector of Circulating Hot Water | G3/4 | Inch |
Coaxial Inlet/Outlet Flue | Φ60/Φ100 | mm |
Rated Pressure of Natural Gas | 2000 | Pa |
Front Nozzle Pressure of Natural Gas (Max/ Min) | 1430/150 | Pa |
Gas Consumption of Natural Gas (Max/Min) | 3.36/1.35 | Nm3/h |
Rated Pressure of Liquefied Gas | 2800 | Pa |
Front Nozzle Pressure of Liquefied Gas (Max/ Min) | 2350/300 | Pa |
Gas Consumption of Liquefied Gas (Max/Min) | 1..3/0.49 | Nm3/h |
Net Weight | 59.5 | kg |
Appearance Dimension: L×W×H | 900×490×450 | mm |
Energy Efficiency Grade | Grade 2 |
3. Super Star
Model | L1PB20-S18B | L1PB26-S24B | L1PB32-S30B | Unit | |
Rated Heat Output | 20 | 26 | 32 | kW | |
Rated Heating supply Output | 18 | 23.3 | 28.8 | kW | |
Minimum Heat Input | 7.4 | 9.6 | 11.9 | kW | |
Minimum Heating Supply Output | 6.3 | 8.2 | 10.2 | kW | |
Range ofHeating Supply Temp. | 30~80 | 30~80 | 30~80 | ℃ | |
Range ofFloor Heating Supply Temp. | 30~55 | 30~55 | 30~55 | ℃ | |
Pressure of Heating Supply System | 0.05~0.3 | 0.05~0.3 | 0.05~0.3 | MPa | |
Maximum Pressure of Heating Supply System | 0.3 | 0.3 | 0.3 | MPa | |
Expansion Tank Capacity | 6 | 6 | 8 | L | |
Preset Pressure Of Expansion Tank | 0.1 | 0.1 | 0.1 | MPa | |
Temp Range Of Shower Water Supply | 30~60 | 30~60 | 30~60 | ℃ | |
Comfortable Temp.RangeOfWater Supply | 35~45 | 35~45 | 35~45 | ℃ | |
Maximum Pressure of Shower Water | 0.6 | 0.6 | 0.6 | ||
Minimum Pressure of Shower Water | 0.02 | 0.02 | 0.02 | MPa | |
ΔT=25℃Water Supply Capability | 10 | 13 | 15 | Kg/min | |
ΔT=30℃Water Supply Capability | 8.3 | 10.8 | 12.5 | Kg/min | |
Voltage/Frequency | 220/50 | 220/50 | 220/50 | V/Hz | |
Maximum Input Power | 110 | 110 | 120 | W | |
Insulation Grade | Ⅰ | Ⅰ | Ⅰ | ||
Waterproof Grade | IPX4 | IPX4 | IPX4 | ||
Connector of Heating Supply Outlet/Backwater | G3/4 | G3/4 | G3/4 | Inch | |
Gas Inlet | G3/4 | G3/4 | G3/4 | Inch | |
Connector of Circulating Hot Water | G3/4 | G3/4 | G3/4 | Inch | |
Coaxial Inlet/Outlet Flue | Φ60/Φ100 | Φ60/Φ100 | Φ60/Φ100 | mm | |
Rated Pressure of Natural Gas | 2000 | 2000 | 2000 | Pa | |
Front Nozzle Pressure of Natural Gas (Max/ Min) | 1200/150 | 1200/150 | 1200/150 | Pa | |
Gas Consumption of Natural Gas (Max/Min) | 2.06/0.75 | 2.67/0.96 | 3.08/1.11 | Nm3/h | |
Rated Pressure of Liquefied Gas | 2800 | 2800 | 2800 | Pa | |
Front Nozzle Pressure of Liquefied Gas (Max/ Min) | 2350/300 | 2350/300 | 2350/300 | Pa | |
Gas Consumption of Liquefied Gas (Max/Min) | 0.75/0.28 | 0.97/0.36 | 1.19/0.44 | Nm3/h | |
Net Weight | 37 | 38.5 | 39 | kg | |
Appearance Dimension: L×W×H | 740×410×328 | 740×410×328 | 740×410×328 | mm | |
Energy Efficiency Grade | Grade 2 |
4. Lucky Star
(1) L1PB18-L18BL
Model | L1PB18-L18BL | Unit |
Rated Heat Output | 18 | kW |
Rated Heating supply Output | 17.3 | kW |
Minimum Heat Input | 6.7 | kW |
Minimum Heating Supply Output | 6.2 | kW |
Range ofHeating Supply Temp. | 30~80 | ℃ |
Range ofFloor Heating Supply Temp. | 30~55 | ℃ |
Pressure of Heating Supply System | 0.05~0.3 | MPa |
Maximum Pressure of Heating Supply System | 0.3 | MPa |
Expansion Tank Capacity | 6 | L |
Preset Pressure Of Expansion Tank | 0.1 | MPa |
Temp Range Of Shower Water Supply | 30~60 | ℃ |
Comfortable Temp.RangeOfWater Supply | 35~45 | ℃ |
Maximum Pressure of Shower Water | 0.6 | MPa |
Minimum Pressure of Shower Water | 0.02 | MPa |
ΔT=25℃Water Supply Capability | 10 | Kg/min |
ΔT=30℃Water Supply Capability | 8.3 | Kg/min |
Voltage/Frequency | 220/50 | V/Hz |
Maximum Input Power | 110 | W |
Insulation Grade | Ⅰ |
|
Waterproof Grade | IPX4 |
|
Connector of Heating Supply Outlet/Backwater | G3/4 | Inch |
Gas Inlet | G3/4 | Inch |
Connector of Circulating Hot Water | G3/4 | Inch |
Coaxial Inlet/Outlet Flue | Φ60/Φ100 | mm |
Rated Pressure of Natural Gas | 2000 | Pa |
Front Nozzle Pressure of Natural Gas (Max/ Min) | 1200/150 | Pa |
Gas Consumption of Natural Gas (Max/Min) | 1.85/0.69 | Nm3/h |
Rated Pressure of Liquefied Gas | 2800 | Pa |
Front Nozzle Pressure of Liquefied Gas (Max/ Min) | 2350/300 | Pa |
Gas Consumption of Liquefied Gas (Max/Min) | 0.68/0.25 | Nm3/h |
Net Weight | 39 | kg |
Appearance Dimension: L×W×H | 740×410×328 | mm |
Energy Efficiency Grade | Grade 1 |
Model | Unit | Pre-mixed Condensing | |
24kw | 30kw | ||
Gas Type | LPG/NG | ||
Rated Gas Pressure | pa | 2800(LPG)/2000(NG) | |
Rated Heat Input | KM | 24 | 30 |
Minimum Heat Input | KM | 10.5 | 12.5 |
Rated Heat Output | KM | 23.3 | 28.8 |
Minimum Heat output | KM | 8.7 | 10.5 |
Efficiency Under Rated Heat input | % | 96.5 | 96.5 |
Efficiency Under 30% Rated Heat input | % | 94 | 94 |
Rated Heat Output | KM | 23.3 | 28.8 |
Temp. RangeOfHighTemp. System | ℃ | 30-80 | |
Temp. Range Of Low Temp. System | ℃ | 30-55 | |
Maximum pressure Of Low Temp. System | bar | 3(0.3Mpa) | |
Expansion Tank Capacity | L | 6 | 8 |
Preset Pressure Of Expansion Tank | bar | 1(0.1Mpa) | |
Rated Hot Water supply | kg/min | 13 | 15 |
Temp Range Of Shower Water Supply | ℃ | 30-60 | |
Comfortable Temp. Range Of water supply | ℃ | 35-45 | |
Application water pressure | bar | 0.2-6(0.02-0.6Mpa) | |
The Minimum Starting Flow | L/min | 2.1 | |
The Minimum Closed Flow | L/min | 1.8 | |
Exhaust Type | Forced exhaust and Air supply type | ||
Water Circulation Type | Airtight force circulation | ||
Ignition Type | Pulse ignition | ||
Thermostat Type | Proportional valve automatic constant temp. | ||
Temp. Display Type | LCD | ||
Power Supply | V/Hz | 220-230/50Hz | |
Maximum Input Power | KM | 110 | |
Fuse | A | 3.15 | |
Insulation Grade | 1 | ||
Electricity And Water Protection Grade | IP | IP44 | |
Appearance Dimension: L×W×H | mm | 740×410×328 | |
Gas Input | Inch | G3/4 | |
Connection For Heating Water Pipes | Inch | G3/4 | |
Connection For Heating Water Pipes | Inch | G1/2 | |
Air Input/Exhaust Duct | mm | 100/60 | |
Packing Size | mm | 820×493×420 | |
G.W./N.W. | kg | 41.5/39 | |
NO | PPM | 80 | |
Loading Q'ty20'/40'/40'HQ | sets | 140/278/320 |
Model | Ocean Star | Unit | ||
Rated Heat Output | 20 | 26 | 30 | kW |
Rated Heating supply Output | 18 | 23.3 | 27 | kW |
Minimum Heat Input | 7.4 | 9.6 | 11 | kW |
Minimum Heating Supply Output | 6.3 | 8.2 | 9.5 | kW |
Range ofHeating Supply Temp. | 30~80 | 30~80 | 30~80 | ℃ |
Range ofFloor Heating Supply Temp. | 30~55 | 30~55 | 30~55 | ℃ |
Pressure of Heating Supply System | 0.05~0.3 | 0.05~0.3 | 0.05~0.3 | MPa |
Maximum Pressure of Heating Supply System | 0.3 | 0.3 | 0.3 | MPa |
Expansion Tank Capacity | 6 | 6 | 6 | L |
Preset Pressure Of Expansion Tank | 0.1 | 0.1 | 0.1 | MPa |
Temp Range Of Shower Water Supply | 30~60 | 30~60 | 30~60 | ℃ |
Comfortable Temp.RangeOfWater Supply | 35~45 | 35~45 | 35~45 | ℃ |
Maximum Pressure of Shower Water | 0.6 | 0.6 | 0.6 | MPa |
Minimum Pressure of Shower Water | 0.02 | 0.02 | 0.02 | MPa |
ΔT=25℃Water Supply Capability | 10 | 13 | 15 | Kg/min |
ΔT=30℃Water Supply Capability | 8.3 | 10.8 | 12.5 | Kg/min |
Voltage/Frequency | 220/50 | 220/50 | 220/50 | V/Hz |
Maximum Input Power | 110 | 110 | 120 | W |
Insulation Grade | Ⅰ | Ⅰ | Ⅰ |
|
Waterproof Grade | IPX4 | IPX4 | IPX4 |
|
Connector of Heating Supply Outlet/Backwater | G3/4 | G3/4 | G3/4 | Inch |
Gas Inlet | G3/4 | G3/4 | G3/4 | Inch |
Connector of Circulating Hot Water | G3/4 | G3/4 | G3/4 | Inch |
Coaxial Inlet/Outlet Flue | Φ60/Φ100 | Φ60/Φ100 | Φ60/Φ100 | mm |
Rated Pressure of Natural Gas | 2000 | 2000 | 2000 | Pa |
Front Nozzle Pressure of Natural Gas (Max/ Min) | 1200/150 | 1200/150 | 1200/150 | Pa |
Gas Consumption of Natural Gas (Max/Min) | 2.06/0.75 | 2.67/0.96 | 3.08/1.11 | Nm3/h |
Rated Pressure of Liquefied Gas | 2800 | 2800 | 2800 | Pa |
Front Nozzle Pressure of Liquefied Gas (Max/ Min) | 2350/300 | 2350/300 | 2350/300 | Pa |
Gas Consumption of Liquefied Gas (Max/Min) | 0.75/0.28 | 0.97/0.36 | 1.12/0.41 | Nm3/h |
Net Weight | 35.5 | 36 | 36.5 | kg |
Appearance Dimension: L×W×H | 700×400×300 | 700×400×300 | 700×400×300 | mm |
Energy Efficiency Grade | Grade 2 |
Model |
|
20kw | 30kw | 32kw |
Gas Type |
|
LPG/NG | ||
Rated Gas Pressure | pa | 2800(LPG)/2000(NG) | ||
Rated Heat Input | KW | 20 | 26 | 32 |
Minimum Heat Input | KW | 8.2 | 10.5 | 13.1 |
Rated Heat Output | KW | 18 | 23.3 | 28.8 |
Minimum Heat output | KW | 6.8 | 8.7 | 10.9 |
Efficiency Under Rated Heat input | % | 90.7 | ||
Efficiency Under 30% Rated Heat input | % | 88 | ||
Rated Heat Output | KW | 18 | 23.3 | 28.8 |
Temp. RangeOfHighTemp. System | ℃ | 30-80 | ||
Temp. Range Of Low Temp. System | ℃ | 30-55 | ||
Maximum pressure Of Low Temp. System | bar | 3(0.3Mpa) | ||
Expansion Tank Capacity | L | 6 | 6\8 | 8 |
Preset Pressure Of Expansion Tank | bar | 1(0.1Mpa) | ||
Rated Hot Water supply | kg/min | 10 | 13 | 15 |
Temp Range Of Shower Water Supply | ℃ | 30-60 | ||
Comfortable Temp. Range Of water supply | ℃ | 35-45 | ||
Application water pressure | bar | 0.2-6(0.02-0.6Mpa) | ||
The Minimum Starting Flow | L/min | 2.1 | ||
The Minimum Closed Flow | L/min | 1.8 | ||
Exhaust Type |
|
Forced exhaust and Air supply type | ||
Water Circulation Type |
|
Airtight force circulation | ||
Ignition Type |
|
Pulse ignition | ||
Thermostat Type |
|
Proportional valve automatic constant temp. | ||
Temp. Display Type |
|
LCD | ||
Power Supply | V/Hz | 220-230V/50Hz | ||
Maximum Input Power | KW | 110 | 110 | 150 |
Fuse | A | 3.15 | ||
Insulation Grade |
|
1 | ||
Electricity And Water Protection Grade | IP | IP44 | ||
Appearance Dimension: L×W×H | mm | 740×410×328 | ||
Gas Input | Inch | G3/4 | ||
Connection For Heating Water Pipes | Inch | G3/4 | ||
Connection For Heating Water Pipes | Inch | G1/2 | ||
Air Input/Exhaust Duct | mm | 100/60(the maximal length is3m) | ||
Packing Size | mm | 820×493×420 | ||
G.W./N.W. | kg | 39.5/37 | 41\35.5 | 41.5\39 |
NO | PPM | 915×135×135 GW:2.8kg | ||
Loading Q'ty20'/40'/40'HQ | sets | 150/310/2360 |
Model | L1PB20-E18B | L1PB26-E24B | L1PB30-E28B | Unit | |
Rated Heat Output | 20 | 26 | 30 | kW | |
Rated Heating supply Output | 18 | 23.3 | 27 | kW | |
Minimum Heat Input | 7.4 | 9.6 | 11 | kW | |
Minimum Heating Supply Output | 6.3 | 8.2 | 9.5 | kW | |
Range ofHeating Supply Temp. | 30~80 | 30~80 | 30~80 | ℃ | |
Range ofFloor Heating Supply Temp. | 30~55 | 30~55 | 30~55 | ℃ | |
Pressure of Heating Supply System | 0.05~0.3 | 0.05~0.3 | 0.05~0.3 | MPa | |
Maximum Pressure of Heating Supply System | 0.3 | 0.3 | 0.3 | MPa | |
Expansion Tank Capacity | 6 | 6 | 6 | L | |
Preset Pressure Of Expansion Tank | 0.1 | 0.1 | 0.1 | MPa | |
Temp Range Of Shower Water Supply | 30~60 | 30~60 | 30~60 | ℃ | |
Comfortable Temp.RangeOfWater Supply | 35~45 | 35~45 | 35~45 | ℃ | |
Maximum Pressure of Shower Water | 0.6 | 0.6 | 0.6 | MPa | |
Minimum Pressure of Shower Water | 0.02 | 0.02 | 0.02 | MPa | |
ΔT=25℃Water Supply Capability | 10 | 13 | 15 | Kg/min | |
ΔT=30℃Water Supply Capability | 8.3 | 10.8 | 12.5 | Kg/min | |
Voltage/Frequency | 220/50 | 220/50 | 220/50 | V/Hz | |
Maximum Input Power | 110 | 110 | 120 | W | |
Insulation Grade | Ⅰ | Ⅰ | Ⅰ | ||
Waterproof Grade | IPX4 | IPX4 | IPX4 | ||
Connector of Heating Supply Outlet/Backwater | G3/4 | G3/4 | G3/4 | Inch | |
Gas Inlet | G3/4 | G3/4 | G3/4 | Inch | |
Connector of Circulating Hot Water | G3/4 | G3/4 | G3/4 | Inch | |
Coaxial Inlet/Outlet Flue | Φ60/Φ100 | Φ60/Φ100 | Φ60/Φ100 | mm | |
Rated Pressure of Natural Gas | 2000 | 2000 | 2000 | Pa | |
Front Nozzle Pressure of Natural Gas (Max/ Min) | 1200/150 | 1200/150 | 1200/150 | Pa | |
Gas Consumption of Natural Gas (Max/Min) | 2.06/0.75 | 2.67/0.96 | 3.08/1.11 | Nm3/h | |
Rated Pressure of Liquefied Gas | 2800 | 2800 | 2800 | Pa | |
Front Nozzle Pressure of Liquefied Gas (Max/ Min) | 2350/300 | 2350/300 | 2350/300 | Pa | |
Gas Consumption of Liquefied Gas (Max/Min) | 0.75/0.28 | 0.97/0.36 | 1.12/0.41 | Nm3/h | |
Net Weight | 35.5 | 36 | 36.5 | kg | |
Appearance Dimension: L×W×H | 700×400×300 | 700×400×300 | 700×400×300 | mm | |
Energy Efficiency Grade | Grade 2 |
Model | Angel Star | Unit | |||
Rated Heat Output | 20 | 26 | 32 | 40 | kW |
Rated Heating supply Output | 18 | 23.3 | 28.8 | 36 | kW |
Minimum Heat Input | 7.4 | 9.6 | 11.9 | 14.8 | kW |
Minimum Heating Supply Output | 6.3 | 8.2 | 10.2 | 12.7 | kW |
Range ofHeating Supply Temp. | 30~80 | 30~80 | 30~80 | 30~80 | ℃ |
Range ofFloor Heating Supply Temp. | 30~55 | 30~55 | 30~55 | 30~55 | ℃ |
Pressure of Heating Supply System | 0.05~0.3 | 0.05~0.3 | 0.05~0.3 | 0.05~0.3 | MPa |
Maximum Pressure of Heating Supply System | 0.3 | 0.3 | 0.3 | 0.3 | MPa |
Expansion Tank Capacity | 6 | 6 | 8 | 8 | L |
Preset Pressure Of Expansion Tank | 0.1 | 0.1 | 0.1 | 0.1 | MPa |
Temp Range Of Shower Water Supply | 30~60 | 30~60 | 30~60 | 30~60 | ℃ |
Comfortable Temp.RangeOfWater Supply | 35~45 | 35~45 | 35~45 | 35~45 | ℃ |
Maximum Pressure of Shower Water | 0.6 | 0.6 | 0.6 | 0.6 | MPa |
Minimum Pressure of Shower Water | 0.02 | 0.02 | 0.02 | 0.02 | MPa |
ΔT=25℃Water Supply Capability | 10 | 13 | 15 | 15 | Kg/min |
ΔT=30℃Water Supply Capability | 8.3 | 10.8 | 12.5 | 12.5 | Kg/min |
Voltage/Frequency | 220/50 | 220/50 | 220/50 | 220/50 | V/Hz |
Maximum Input Power | 110 | 110 | 120 | 130 | W |
Insulation Grade | Ⅰ | Ⅰ | Ⅰ | Ⅰ |
|
Waterproof Grade | IPX4 | IPX4 | IPX4 | IPX4 |
|
Connector of Heating Supply Outlet/Backwater | G3/4 | G3/4 | G3/4 | G3/4 | Inch |
Gas Inlet | G3/4 | G3/4 | G3/4 | G3/4 | Inch |
Connector of Circulating Hot Water | G3/4 | G3/4 | G3/4 | G3/4 | Inch |
Coaxial Inlet/Outlet Flue | Φ60/Φ100 | Φ60/Φ100 | Φ60/Φ100 | Φ60/Φ100 | mm |
Rated Pressure of Natural Gas | 2000 | 2000 | 2000 | 2000 | Pa |
Front Nozzle Pressure of Natural Gas (Max/ Min) | 1200/150 | 1200/150 | 1200/150 | 1200/150 | Pa |
Gas Consumption of Natural Gas (Max/Min) | 2.06/0.75 | 2.67/0.96 | 3.29/1.22 | 4.1/1.5 | Nm3/h |
Rated Pressure of Liquefied Gas | 2800 | 2800 | 2800 | 2800 | Pa |
Front Nozzle Pressure of Liquefied Gas (Max/ Min) | 2350/300 | 2350/300 | 2350/300 | 2500/300 | Pa |
Gas Consumption of Liquefied Gas (Max/Min) | 0.75/0.28 | 0.97/0.36 | 1.12/0.41 | 1.49/0.55 | Nm3/h |
Net Weight | 35 | 35.5 | 36 | 36.5 | kg |
Appearance Dimension: L×W×H | 740×410×328 | 7740×410×328 | 740×410×328 | 740×410×328 | mm |
Energy Efficiency Grade | Grade 2 |
Advantages
1.Residential condensing wall mounted boiler is with low carbon emission, which is environment friendly.2.It is with optimal efficiency and low energy consumption.
3.It is easy to install and operate.
Notes of Condensing Wall Hung Boiler
1.Avoid adding chemical material into the residential condensing wall mounted boiler, especially the antifreeze.2.It is highly suggested not to change the water in the heating radiator, because water-changing will bring in vast thermonatrite, which will speed up the formation of incrustation.
3.Take full consideration of family members’ working and living habits when starting heating, so as to set different temperature for different period through temperature controller.
4.Drain out the water and turn off the gas and power supply when not using the residential condensing wall mounted boiler for a long time.
-
Email: betty@roll-forming.cn